Fender Twin Reverb by @Boukman
Fender Twin Reverb and Champ by
Boss Katana Mini - 3 Channels by @novemberist
BASS: Darkglass AO900 by @Charan_Mellor
Marshal JMP Low Sensitivity Input - Pedal platform, clean. by @mreed707
Two Notes Captor
Sounds great with Guitarix Gxcabinet 4x12 with treble set at 10 o’clock.
Heavy - ESR 0.003 (on third attempt, the first 2 were 0.011 - didn’t change anything just kept running the cell)
A/B against real amp very very close, amazed.
Sounds great with DIY OCD, Rat and TS-9
JMP Low Input.json (81.5 KB)
Did this sound good to you
“Schmitt | based on Bogner Uberschall rev blue” by
Hailstorm | high gain based on EVH 5150 III 100W by @LievenDV
Ibanez TSA5TVR by @malfunction54
I profiled my little Ibanez 5W tube amp. When paired with a Jensen C8R IR, it sounds reasonably close to the real thing. This profile is clean, but I recorded on max volume. It is fairly easy to push into breakup. Treble at 10 o’clock, bass at 2 o’clock, built-in spring reverb off, and built-in TubeScreamer circuit off.
Ibanez TSA5TVR.json (171.3 KB)
Jad Freer Capo - Bass preamp by @mrdinsdale
EAE Halberd v2 and Longsword V4 by @mrdinsdale
Heres a few rough captures based on the Electronic Audio Experiments Halberd and Longsword pedals.
This is a first pass and need to take more time to A/B them with the real thing, once I’m happy with the results I’ll expand the captures to include a few different flavours as both are hugely responsive to the settings.
Thick and crunchy - Heaviest voicing with Gain, Tone and Depth set to 1 o’clock.
eae-halberd-thick-crunch.json (31.7 KB)
Thick and chewy - Heaviest voicing with Gain and Depth at around 3, Tone at 1 o’clock
eae-halberd-thick-chewy.json (31.7 KB) Longsword
Bass settings with boost - Silicone clipping with bass boost. Gain at 12, boost at around 11
eae-longsword-bass-settings-with-boost.json (31.7 KB)
Marshall JCM900 by @Rafa_Ruiz
HI everyone!! Second chance… this time a real JCM900 High Gain Dual Reverb Combo.(only preamp) I used the DI out direct to my MOD Dwarf and record everything without any other kind of hardware… easy and AMAZING!! I´m just starting with this tec,but there are endless possibilities I think… Hope anyone can find it useful, I use it with a tubescreamer in front of it (software in my MOD Dwarf) and it crank very well…a 4x12 simulation a bit of EQ and ready…
JCM 900_LSTM-16-0.json (53.4 KB)
Traynor Dark Horse by @Trilby
Victory VX Kraken Models by @lordsilly
I’ve made two models so far of channel 2, one with and one without the bass focus switch engaged. I used the settings I generally like to use personally (shown in the picture).
Victory-VX-CH2-FOff-G5-Heavy.json (80.8 KB)
EKmPkUQ4KI3gmZu.json) (80.6 KB)
Soldano SLO by @Rafa_Ruiz
TIis time a capture of a Soldano SLO amp emulator with some eq … I was using it with my dwarf in some gigs and it was nice , so maybe can be useful for you too…
SLO Overdrive_LSTM-16-0 (1) (1).json (53.3 KB)
VX Kraken Ch1 through Randall V30 + SH57 by @jazzbre
I tried replicating my base amp + cabinet and I think it turned out well.
This was recorded with the exact settings I use normally when mic-ed (I didn’t exactly nail mic placement this time). I didn’t use the real input.wave but I just played weird stuff on different pickups and settings for about 5mins.
For a first and really hacky test I think it turned out pretty good, that’s why I’m sharing it here.
Victory_VX_Channel1_RandallV30.json (81.2 KB)
Brunetti 059 by
Diezel based amp (simil Herbert) by @Teuvosick