Brilliant! Have you got any bass rigs in there?
2 Likes
not yet but I have the terror bass on my list for next week.
and that for the weekend after that:
Let me know what you would need.
10 Likes
I’ve always fancied a tech21 sansamp . . .
6 Likes
Hi i wanted to do a simple pedalboard with AidaX preset list as an amp list, that i can quickly go through with a knob, when for example giving it to a friend to try.
I picked up my favourite models, and saved them as different presets in plugin.
So for example Fender Tweed - tweed40cleanblabla.json loads, Marshall JMP - JMPlowinput.json loads.
It works for a bit but when i adjust output to match with other amps, and i save preset, and then go for another one, the models stays on the old one, and actually breaks saved preset so it does’t have an specific .json file attached before to it. It then just grabs whatever was loaded before, not the .json file i originally saved it with.
It happens both with using knobs on Dwarf, an in the webgui.
I think some further steps would be required to find the cause.
1 Like
I just stumbled upon AIDAX when researching DSPs, I’m a bit confused. I don’t own a Mod device. I downloaded the 6 freebie models from the site, but I’m not seeing where I can find more. I see there’s a bunch of commercial plugins for purchase however it seems those are just for the hardware devices? How can I get these for the desktop app version of AIDAX?
Here you go:
I’ve noticed that disabling the AIDA-X plugin in the latest build cuts the audio rather than bypassing the plugin. I’m assuming this wasn’t intended?
I’ve worked around it by adding a channel switch to bypass instead for now. Where’s best to raise this?
2 Likes
Hi, thanks for reaching out!
I´m impressed -
I beg for Sunn Amps (S and T) - Simulations …it will spill fans from Fractal Audio to MOD, I´m sure - as they´re lackin Sunn Amps totally.
…aside from that, maybe you guys offerin us some price-reduction for a set of sims soon?`
2 Likes
I don’t have a Sunn amp but do have an EAE Model Fet which is about as close to the real Model T as you can get in pedal form.
It’s out of action following a power surge but once it’s repaired I’ll get lots of models!
4 Likes
I have a Burning Sunn from Ground FX - which is in the ballpark I think.
Just have to learn some doom riffs to compare it to other sounds and if it sounds good I make a model out of it with the separate channels.
We won’t be offering models of amp sims.
We might release a new training where it would be easier to capture these - but not in the near future.
4 Likes
They sound monstrous from demos! I was watching a shoutout of Model T emulations, the Exegol one sounded great too.
Same here. Glad you posted about this because I probably would have gone mad trying to figure out why my pedalboard had no sound! Hopefully this gets fixed ASAP!
Edit: It’s fixed! Thank you!
3 Likes
yeah this can sound pretty massif:
4 Likes
For Bass -
everything clean and gritty Amps please:
Hi-Watt 200, Ampeg Portaflex, Darkglass Amps, MesaBoogie, Ampeg SVT
2 Likes
new Update for the JCVM Plugin
Marshall JCM 900 SLX
4 Likes
Hey @spunktsch,
how about you´d care to build at least one linear Amp Sim Model -
as needed for all electric Organs and Pianos Hammonds/Rhodes back in the days?
This Amps were and are LINEAR, lots of HEADROOM,
clearly no Guitar or Bass Amps, so.
Thinking, many of us out there would be interested in getting some Sims for our Synth-Equipment.
For Instance:
- Roland Jazz120
- Hiwatt 200
- Hammond B, C
- Wurlizer Amps…
- MesaBoogie 400
- VOX V.8
hope to read from you again soon
1 Like
You know that someone would need to actually have access to such an amp?
Nice list though. Hope someone (without pointing out some specific one and claiming they don’t care) will be able to.
1 Like
If we are talking really linear amps, I think an IR will likely work better than the machine learning.
Have you tried the Twin Classic? It has A LOT of headroom 
I am also looking for a Roland JC120 sound, btw
5 Likes
Hey,
Thanks for your answer.
Which Twin Classic model are you referring to, please?
So you mean an AidaX Twin Classic or some IR Model File for an IR Plugin?