List of shared models

[jon]

Strymon Riverside
Model of the Strymon Riverside pedal with High Gain settings made by @LievenDV

Coastal overdrive | in the style of Strymon Riverside (high+low gain)

[image] Hi guys, My first attempt at re-amping a pedal without mic’ing, just using the Dwarf. I did some manual aligning because there was a brief latency/difference on the signals. If useful, I can do different trainings and different settings. ESR was my lowest ever. Strymon Riverside HIGH GAIN presence setting on the back: middle setting [image] Dwarf with audio player: output 1 → input 2 [image] Yes my foil is STILL ON! [image] device = MOD-DWARF file_name = Strymon-R…

[jon]

TC Electronics BLD
Collection of models of an original rare TC Electronics BLD pedal by @Ken

Tc bld collection

Hi Guys, Today, We would like to share very rare vintage one! The based model is original vintage of BOOSTER+LINE DRIVER&DISTORTION from TC Electronic. This pedal is very famous for being used by Allan Holdsworth. BLD_COLLECTION I have captured according some gain parameters in DIST mode. Other parameter is almost 12 o’clock, and noise gate is almost off. Please note: All models are captured “only drive pedal” without Amp and Cabs. The GAIN setting values are those listed on the unit. -…

[jon]

Ignite Amps NRR-1
Model of the Ignite Amps NRR-1 free VST amp simulator made by @LievenDV

Reaper | High Gain amp

[image] I modeled a free amp VST in one of my attempts today, exploring the collab workbook This was one of most accurate and I must say they are pretty close! The model is based on the NRR-1 NRR-1 is a digital emulation of a three channels tube preamplifier for guitar. It has been developed to accurately model its real hardware counterpart, built for Fleshgod Apocalypse guitarist Cristiano Trionfera by Ignite Amps, back in 2009. The NRR-1 core circuit is mainly based on a famous boutique p…

[jon]

5150 VST by Vadim Taranov
Model from 5150 VST by Vadim Taranov. This is an amp simulator plugin that emulates the famous Peavy 5150. This model was made by @LievenDV

Point Fifty | High gain amp in the Peavey/EVH 5150 style

[image] Demo 1 Demo 2 Buon giorno! I trained the model for the 5150 VST by Vadim Taranov. It emulated a Peavy 5150 I named this model after my own Heavy Metal / Thrash band Point Fifty, because of the similar amps we use Standard CPU usage device = MOD-DWARF file_name = Point50 unit_type = LSTM size = 16 skip_connection = 1 ESR after training: 0.08176770061254501 Point-Fifty-amp-high-gain.json (53.3 KB)

[jon]

LePou LE456
Model of the free amp simulator plugin LePou LE456. This amp emulates an Engle Powerball amp.
Model made by @LievenDV

Fireball amplifier | in the style of LE456 and Engl Powerball

[image] Hi guys, I modeled a classic, the LePou LE456, a VST amp which emulates an Engle Powerball amp. High gain 500 epoch training ESR 0.134ish Works best with a cab IR (or amp settings) with some presence. Fireball-amp-high-gain.json (53.6 KB)

[jon]

Ignite Emissary
Model from the free High Gain amp simulator VST Ignite Emissary from @LievenDV

Diplomacy | High gain amp in the style of the Ignite Emmisary

[image] Diplomacy Version 3 (3rd attempt, best result so far) High gain amp, modelled after the free amp VST: Ignite Emissary (STL Tones), a loud metal machine! Standard CPU load --- device = MOD-DWARF file_name = v3 unit_type = LSTM size = 16 skip_connection = 1 30% 149/500 [08:02<17:49, 3.05s/it]validation patience limit reached at epoch 150 30% 149/500 [08:07<19:08, 3.27s/it] finished training: v3_LSTM-16 ESR after training: 0.04421577230095863 DEMO: demo setup: [image] Downl…

[jon]

Diezel Herbert
3 models of the software amp simulator Diezel Herbert with clean, drive and lead settings from @Teuvosick

Diezel based amp (simil Herbert)

3 captures of this amp, not the original, is like a homemade, I lost the logs and esr but under 0.03 Cheers herbert ch2 clean.json (53.6 KB) herbert ch2 drive.json (53.4 KB) herbert ch2+ lead.json (53.4 KB)

[jon]

Matchless C30 from Headrush MX5
Model of the Matchless C30 version for Headrush MX5 made by deer ink studios (aka @spunktsch)

Deer ink studios - models (high gain, edge and clean)

To keep things organized I’ll be posting my models in this thread and update the first post. [P1170812] deerinkstudios-tw40-usa-high_LSTM-16.json (53.7 KB) "source":"original", "style": "high gain", "based": "Egnater Tweaker 40 USA", "author": "deer ink studios", "dataset": "mod", "esr": 0.04859083518385887 Headrush MX5 deerinkstudios-mx5-ms30-clean.json (32.1 KB) "source": "MX5", "style": "clean", "based": "Matchless C30", "author": "deer ink studios", "dataset": "extended", "esr": 0…

[jon]

*5150 from Headrush MX5
Model of the 5150 version for Headrush MX5 made by deer ink studios (aka @spunktsch)

Deer ink studios - models (high gain, edge and clean)

To keep things organized I’ll be posting my models in this thread and update the first post. [P1170812] deerinkstudios-tw40-usa-high_LSTM-16.json (53.7 KB) "source":"original", "style": "high gain", "based": "Egnater Tweaker 40 USA", "author": "deer ink studios", "dataset": "mod", "esr": 0.04859083518385887 Headrush MX5 deerinkstudios-mx5-ms30-clean.json (32.1 KB) "source": "MX5", "style": "clean", "based": "Matchless C30", "author": "deer ink studios", "dataset": "extended", "esr": 0…

[jon]

Friedman Small Box from AxeFX3
Model of the Friedman Small Box version for AxeFX3 made by @Teuvosick

Friedman Small Box (Dynamic) - Standard training

One of my fav amp blocks on AxeFX3. I can’t tell the exact gain because it has an envelope follower modifier on this parameter: more stronger you play and the gain increase from 2,2 to 4,8, anyway these are the parameters. IR used for my reference: Orange PPC 4x12 [Screenshot 2023-04-10 alle 01.10.46] small box dyna std.json (53.6 KB) ESR after training: 0.019518960267305374

[jon]

Vox AC-30 from Helix Native
Two models of the Vox AC-30 version for Helix Native, one with normal and another with Top Boost made by @Cato

Vox AC-30 Models

I have put together some all-in-one (not IR/cab sim needed) captures/profiles of a Vox AC-30 at edge-of-breakup using Helix Native. I’m pretty happy with them and hopefully, they can help others too. In general, I am getting some pretty hit-and-miss results, but these were some of my better ones. I found reducing the input gain helped as the default neural modelling process seems to create a higher gain model than what it was supposed to be. Vox AC-30 Normal.json (53.9 KB) Vox AC-30 Top Boost…

[jon]

Darkglass
Model for bass of the Darkglass pedal without cabinet from @danimourinho

About the Neural Modelling category

Here is my first capture of my bass sound that i am using for my band Halogram. I have captured the NEURAL DSP DARKGLASS plug in with my personal settings and without a cab. It doesn’t sound exactly as the original source but I will definitely use this to play live with my Dwarf. If anybody could advice how to get better results please let me know. Halogram - Darkglass Distor.json (53.4 KB) Halogram Darkglass Sound Comparison Real/Capture

[jon]

Matchless DC30

Three models of the Matchless DC30 version for Helix Native. These models include already cab sims and were provided by @Cato

Matchless DC30 Models

Previously, I put together a couple of Vox AC-30 models at the edge-of-breakup using the Helix. I’ve done the same thing with the Matchless DC30 models. These are also all-in-one models so no cab sim or IR is needed. The Channel 1 models are brighter. One of them is cleaner and one of them is more dirty. You can adjust the gain in the AIDA plugin though. The Channel 2 one is darker and more punchy. Matchless DC30 Ch1 Clean.json (53.6 KB) Matchles DC30 Ch1.json (81.2 KB) Matchless DC30 Ch2.js…

[gianfranco]

Orange Rockerverb 50

@gianfranco

Orange Rockerverb, captured by @itskais and @jesse

There are 5 different captures, ranging from clean to nasty

AMP Orange Clean.json (31.9 KB)
AMP Orange Crunchy1.json (31.8 KB)
AMP Orange Crunchy2.json (31.9 KB)
AMP Orange Dirty.json (31.8 KB)
AMP Orange Nasty.json (53.6 KB)

Capture of amp only. Does not include cabinet.

[gianfranco]

Marshall JVM 410H

@gianfranco

Marshall JVM 410H. Five captures ranging from clean to crunch

AMP Marsh JVM Clean1.json (31.9 KB)
AMP Marsh JVM Clean2.json (31.9 KB)
AMP Marsh JVM Crunch.json (31.8 KB)
AMP Marsh JVM OD1.json (53.6 KB)
AMP Marsh JVM OD2.json (53.4 KB)

Captured by @jesse and @itskais. Does not include the cabinet.

[gianfranco]

Multiple Ampsims by @Boukman

@Boukman

Since a lot of people capture other amp sims i thought of capturing some of my favourite sounds from Scuffham amps S-Gear,Ampbox (Euphoria) and Bulldog amps sims.
Let me know what you think!
Cheers
S-gear Nuno.json (53.4 KB)
S-gear Dean.json (53.5 KB)
S-gear Technical Difficulites.json (53.6 KB)
Bulldog Satch.json (53.5 KB)
Ampbox PG.json (53.6 KB)
S-gear Keith Scott.json (53.6 KB)

[gianfranco]

Fender Twin

@gianfranco

Fender Twin, captured by @itskais and @jesse

AMP Twin Custom1.json (31.9 KB)
AMP Twin Custom2.json (31.8 KB)
AMP Twin Vintage1.json (53.7 KB)
AMP Twin Vintage2.json (53.5 KB)

These captures are amp only. Cabinet not included.

[gianfranco]

Fender Blues Deluxe

@gianfranco

Six captures ranging from clean to dirty.

AMP Blues Deluxe Clean1.json (32.1 KB)
AMP Blues Deluxe Clean2.json (31.9 KB)
AMP Blues Deluxe Clean3.json (31.9 KB)
AMP Blues Deluxe Crunchy.json (31.9 KB)
AMP Blues Deluxe Dirty.json (53.6 KB)
AMP Blues Deluxe Gainy.json (31.9 KB)

Amp only. No cabinet included.

[gianfranco]

POLYTONE Mini Brute (Preamp Out) by @Loris_Donatelli

@Loris_Donatelli

This is my cloning of the legendary “Polytone Mini Brute” Jazz guitar amp. I cloned only the preamp without reverb, I personally use it with a 1 x 15 cabinet and with reverb of your choice.

POLYTONE Mini Brute (Preamp Out).json (53.8 KB)