It may not say Arduino, it will say the name your MIDI pedal sends to the Dwarf.
But, the fact that you seem to be able to select a device there means that the Dwarf does detect your pedal to some extent.
3 Likes
Maybe so, I’m not sure. I will boot up the Dwarf later today with the pedal not connected and see if that check box disappears.
1 Like
Well, I don’t know. That check box is still there saying “USB Gadget Midi 1 (in+out)” whether I boot the Dwarf with the USB expression pedal or not. And I still can’t get the expression pedal to control anything.
It looks like you need to test your pedal to make sure it is working. You say that
but Macs see hardware IDs of non-functioning equipment – it can see the hardware ID of a drive that won’t mount, for instance.
I’d suggest you test your pedal outside of Dwarf to begin with. Use an app such as Snoize’s Midi Monitor and check on your Mac if the pedal outputs any midi data.
Also, check if the dip switches of your pedal are on the appropriate position.
(Did you acquire this pedal second-hand, by any chance? I’m asking because they were prone to fail and Crumar discontinued them. It shows “Arduino” on your Mac but “USB Gadget Midi” on your Dwarf, and that’s not a good sign.)
If your pedal outputs proper midi data through the proper channel and your Dwarf still doesn’t see it, then reach out to support at
6 Likes
It was an “Open Box” unit and I too am suspecting it might be the pedal now. I’m returning it as I did order a couple of different USB to MIDI adapters - something told me that I should. I just hope one of them works.
4 Likes
That is the internal MIDI of the Dwarf.
If your pedal is not listed there and you can’t map it, most likely it’s an issue with the pedal. The platform is fairly simple mapping MIDI and that is totally explained in the wiki.
2 Likes
In my tests, in order for the “Check Box” representing your pedal to disappear once you have disconnected it from the USB port, you have to change to Aggregated and back to Separated Modes. I think there is a refresh issue in this configuration window.
1 Like
Good luck there and, if they do, please post back.
3 Likes
Well, the Doremidi Midi Converter works. I can assign whatever pedal puts out to a gain plugin and control it with the pedal. That’s great. However, it is super rough and makes the Gain plugin go from zero to full blast. Anybody have any suggestions on how to make the incoming data smoother and to limit its CC value range so that it can’t go full blast?
you can limit the range on the advanced tab when you assign them to midi.
3 Likes
One way to do this is in the assignment window, in advanced settings, you can set the range 
Edit: I was too slow and distracted half way through writing the reply 
thanks @spunktsch !
3 Likes
Cool that your problem seems to get a good ending !
Do you mind if I rename this thread so it could be found by others who would face the same difficulties ?
2 Likes
Sure, @Rom
I hope it’s solved. I haven’t tried the suggestions yet and I’m still concerned about how jittery the volume swells sound. I’ll tinker with it when I can and give a report.
2 Likes
@Gino Hey, just curious, did you end up returning the Crumar pedal? Does it not work without the USB-Midi adapter? It’s not really clear in the sales description if it sends midi data or just has midi channels available…
1 Like
I did send it back. It didn’t seem to work at all. I haven’t had a chance to go and see if I can smooth out the CC messages being sent by the Doremidi device. It works but it’s not all that usable.
2 Likes
Also with the Crumar?
2 Likes
yes - my computer recognizes it but i’m not able to get a signal. tried on both windows and mac
2 Likes
I believe that @Gino at the time discovered that the Crumar was not sending proper MIDI data. If it doesn’t work also with Windows or MacOS reach out to their support, we can’t help you much here about that 
Sorry
2 Likes